the signal recovery model 5210 is the benchmark dual-phase lock-in amplifier against which others are judged. it is widely referenced in technical publications describing a diverse range of research applications including optical, electrochemical, electronic, mechanical and fundamental physical studies. we also offer a single-phase version, the model 5209.although the introduction of instruments using digital signal processing has brought advances in phase sensitive detection techniques, units using analog demodulators are still the first choice for many experiments. these include those requiring a true analog output, for example in some feedback control loops, or where the instrument is used to recover the envelope modulation of a "carrier" frequency. of course, they are also chosen for compatibility with previous experimental setups.
voltage or current inputs...the instrument includes a current preamplifier with two transimpedance settings and so can directly measure signals from current sources such as photodiodes. with an input impedance of down to typically only 25 w the resulting voltage generated across the source by the signal current is minimized for the very best performance.
continuous full-scale sensitivity control...as with all lock-ins the model 5210 has a range of calibrated full-scale sensitivity settings. however, unlike other units it also has a sensitivity vernier control, allowing the full-scale sensitivity to be set to any value between the calibrated values. suppose you are performing an optical transmission experiment and you want to measure transmission in terms of a percentage relative to that of a "reference" sample. all you need to do is put the reference sample in the optical path and press the auto vernier control on the lock-in. it will then adjust the sensitivity so that the display reads 100%. now replace the reference sample with the test sample and read the percentage transmission directly.
unique walsh function demodulators...the simplest method of implementing the phase sensitive detector at the heart of an analog lock-in is with a reversing switch driven at the reference frequency, giving excellent linearity, dynamic range and stability. this is known as a "squarewave" demodulator since the instrument responds to signals not only at the reference frequency but also at its odd harmonics. it offers much better performance than can be achieved by using a true analog multiplier, which requires the synthesis of a very pure reference sinusoid and is very non-linear when handling large levels of interfering signal.
squarewave demodulation is ideal for many applications, such as experiments using chopped light beams where the signal being detected is a square-wave, since the odd harmonics contain useful information. however in other cases the requirement is for "sinewave" or "fundamental" response where only signals at the reference frequency are measured.
in theory, a squarewave can be modified to a sinewave response by in-serting a low-pass or bandpass filter in the signal channel ahead of the demodulator. however this requires a highly se-lective filter in order to reject signals at the third harmonic without at the same time causing significant phase and magnitude errors for signals at the reference frequency.
the model 5210 uses a modified form of switching demodulator, known as the walsh demodulator, which multiplies the applied signal by a stepped approximation to the reference sinusoidal waveform. this gives a demodulator that does not respond to signals at the third and fifth harmonics, although it does respond to higher harmonics. a fourth-order signal channel filter is therefore included to reject these harmonics, giving a overall sinewave response. the advantages of the switching demodulator are thereby retained without the phase and magnitude errors associated with the use of highly se-lective filters.
the instrument can be switched to operate in either sinewave or squarewave mode, giving you the choice of the optimum detection method for your experiment. only signal recovery gives you this flexibility.
choice of signal channel filter modes…in the usual sinewave response mode, the filter is set to the bandpass or low-pass modes. but what if you are trying to measure a signal at twice the reference frequency in the presence of a strong signal at the reference frequency? in this case, the filter can be set to a notch (band-stop) mode and tuned to the reference frequency, leaving the signal at 2f unattenuated and easy to measure.
in addition to the main signal channel filter, a line-frequency rejection filter operating at 50/60 hz and/or 100/120 hz is also included, for elimination of troublesome line pickup.
high dynamic reserve...the combination of the walsh demodulator(s) and the signal channel filter gives the instruments a dynamic reserve of up to 130 db - implying that you can, for example, measure a signal of 1 礦 in the presence of an interfering signal of more than 1 v. no other analog lock-ins deliver this performance.
output filters...the output low-pass filters offer time constants in the range 1 ms to 3 ks, with all settings available at slopes of both 6 and 12 db/octave. in addition, the units include a rear-panel output giving the signal at the output of the in-phase (x-channel) demodulator with a time constant of typically only 100 祍, for use in those applications such as tandem demodulation where the largest output bandwidth is required.
synchronous adc trigger...the analog outputs from the demodulators, after filtering by the output low-pass filters, need to be digitized by an analog to digital converter (adc) for display or for transfer to the controlling computer. if this conversion is carried out asynchronously then the resulting values can display significant jitter. this is because the demodulator output contains not only the required dc level, but also signals at twice the reference frequency. when the output is sampled for conversion, this 2f signal means that some samples will be smaller and some larger than the mean.
of course, the 2f component can be reduced to any arbitrarily small value by increasing the time constant, but this reduces the response time to changes in input signal, slowing down data throughput. the model 5210 therefore offers a unique reference synchronous adc trigger mode, which guarantees that the output is sampled at the same point relative to the reference waveform and thereby removes this source of error.
internal oscillator...with the model 5210 there is no need to buy a separate oscillator to use as an excitation source for your experiment, since it includes one capable of generating a low distortion sinewave output signal over a frequency range of 0.5 hz to 120 khz. although in most lock-ins the frequency of the internal oscillator can be adjusted, in this instrument the amplitude can also be controlled over the range 1 mv to 2 v rms.
manual or computer control...in manual operation the backlit control setting indicators, the two digital displays and the analog panel meter makes the instrument very easy to use, with the settings of all the important controls being instantly visible. six auto functions further simplify control adjustment, while red overload and reference unlock leds warn of conditions which will result in measurement errors. all the front panel indicators can be turned off for use in blackout conditions.
the instrument includes gpib (ieee-488) and rs232 computer interfaces, allowing virtually all the controls to be operated, and all the outputs that can be displayed to be read, via simple ascii mnemonic-type commands. the communications interface parameters, such as baud rate and gpib address are set by front-panel controls, with no difficult dip switches to adjust.
compatible labview drivers are available for those researchers working in that environment while the unit is also supported by the srinstcomms activex control and sdk. it can also be used with our acquire? lock-in amplifier applications software package, which allows non-programmers an easy way to log the instrument outputs to a pc file. the labview driver and a demonstration version of the software, demoacquire, are available for download from this site.
HYDE PARK HYDE PARK傳感器、HYDE PARK光電開關、HYDE PARK接近傳感器,HYDE PARK超聲波接近傳感器、HYDE PARK光電傳感器、HYDE PARK引導式接近傳感器
CYZ-A型自吸式離心油泵是根據國內外有關技術資料經消化、吸收、改進后研制而成的最新泵類產品。該自吸式離心油泵適用于石油行業、陸地油庫、油罐車的理想產品,并適合于作船用貨油泵、艙底泵、消防泵和壓載泵及機器冷卻水循環等,分別輸送汽油、煤油、柴油、航煤等石油產品和海水、清水、質溫度-20℃~80℃,如輸送化工液體可該用耐腐蝕機械密封。
CYZ-A型自吸式離心油泵的特點1、該CYZ-A型泵屬自吸式離心泵,具有結構簡單,操作方便,運行平穩、維護容易、效率高、壽命長,具有較強的自吸能力等優點。管路中不需要底閥,工作前只需保證泵體內儲有定量引油即可。用于油輪或輸水船舶上時,可兼作掃艙泵,掃艙效果良好。
2、CYZ-A型自吸式離心油泵是選用優質材料精制而成,密封采用硬質合金機械密封,經久耐用,吐出管路不需要安裝安全閥,吸入管需要安裝底閥,因此簡化了管路系統,又改善了勞動條件。
|
低溫恒溫反應浴
可替代干冰和液氮做低溫反應,高控溫精度,主要用于燒瓶、燒杯、試管等的冷卻、加熱、恒溫等。用于醫院、科研、高校在生物酶等方面的實驗、檢測和鑒定。 ●溫度數字設定和顯示。 ●全封閉式磁力攪拌器,保證攪拌穩定性。 ●可配備內置二級攪拌,與反應容器內的攪拌子一起,使試料的溫度保持均勻一致。 ●可調節的槽蓋口徑,減少冷媒消耗。 ●配備固定桿,方便滴定管,傳感器等其它配套裝置的放置固定。 ●國際著名品牌壓縮機,高可靠性、高效率。 ●設有方便工作人員更換浴液的放液口。
紹興蘇伯儀器有限公司主要產品:凈化工作臺,生物安全柜,滅菌器,恒溫培養箱,生化培養箱,恒溫水槽,恒溫水浴鍋,電熱干燥箱,真空干燥箱,箱式電阻爐,馬弗爐,超聲波清洗機,電熱套,霉菌培養箱,振蕩器,真空泵,蒸餾水器,標準篩,細胞篩,試驗機,水泥試驗設備,混凝土試驗設備,砂漿試驗設備,土木工程試驗設備,電子天平,分析天平 紹興蘇伯儀器有限公司售后服務:設備的保修期為一年,正式生效日期為買方在該設備的驗收合格書上簽字之日起計算。在保修期內,賣方負責該設備由于設備自身原因而引起的各種故障問題并負責無償解決。在保修期外,該設備的維修工作要收取備品備件的成本費用和一定的服務費用。 維修反應時間為:2 小時內響應 或到我們的網站進行留言 www.sobo18.com 蘇伯儀器主站 www.puddingtoys.com 培養箱子副站 咨詢購買更多型號請瀏覽本站 www.hzhcjdwx.com 干燥箱副站 咨詢購買更多型號請瀏覽本站 www.hlyongkang.com 凈化工作臺副站 咨詢購買更多型號請瀏覽本站 www.ahgeying.com 恒溫槽副站 咨詢購買更多型號請瀏覽本站 技術部電話: 銷售員電話:18657581987 傳真: 賣方在接到買方的故障通知后,保證在2 小時內做出響應,并爭取在最 短的時間內盡快排除故障。
購買更多型號產品,請到我們的網站進行購買或電話聯系銷售員 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
SUNX光幕傳感器 小型光幕傳感器/牢固型光幕傳感器 SF4-AH8-N/AH12/AH16/AH20/AH24/AH28/AH32/AH36/AH40/AH48/AH56/AH64/AH72/AH80/AH88/AH96/ SF2-AH8/AH12/AH16/AH20/AH24/AH28/AH32/AH36/AH40/AH48/AH56/AH64/AH72/AH80/AH88/AH96/ SF2-AA8/AA12/AA16/AA20/AA24/AA28/AA32/AA36/AA40/AA48/ SF2-NH8/NH12/NH16/NH20/NH24/NH28/NH32/NH36/NH40/NH48/NH56/NH64/NH72/NH80/NH88/NH96/ SF2-NA4/NA6/NA8/NA10/NA12/NA14/NA16/NA18/NA20/NA24/NA28//NA32/NA36/NA40/ SF2-EH12-N/EN16/EH20/EH24/EH28/EH32/EH36/EH40/EH48/EH56/EH64/EH72/EH80/ SUNX區域傳感器 單個光軸輸出/薄型/檢選 NA40-4/NA40-6/NA40-8/NA40-10/NA40-12/NA40-14/NA40-16/NA40-20/NA40-24/ SF1-F8/SF1-F16/SF1-F24/SF1-F32/SF1-F40/SF1-F48/SF1-F56/SF1-F64/ NA2-N8/NA2-N12/NA2-N16/NA2-N20/NA2-N24?NA2-N28/ NA1-11/NA1-5/NA1-PK5NA1-PK3/ SUNX用于半導體工業的傳感器 漏液/液面監測 FX-301-F/ FD-F705/FD-F707/7FD-F41/FD-F91/FD-F4/FD-F9/FD-F8Y/ FT-F902/FT-F905/FT-Z802Y/ EX-F71/EX-F72/EX-F61/EX-F62/ EX-F1/ SUNX特殊用途傳感器 金屬雙重重疊監測器 GD-C1/GD-C2/GD-C3/GD-3/GD-10/GD-20/ SUNX水檢測傳感器 EZ-11/
名稱:片狀電阻 品牌:VISHAY、NICHCON 、臺灣麗智、國巨、風華
體積:1005、1608、2012、3216、3235、4532、2512、2010 阻值范圍:0Ω~33MΩ
誤差:F=+-1% J=+-5%
防爆,全天候防護等,可用于天然氣
1950G系列 防爆型微差壓開關具有德威爾1950系列差壓開關的所有性能,還可用于天然氣的監測。它可以用于室外安裝,并達到UL的防爆認證:Class I, Groups A, B, C, & D; Class II, Groups E, F, & G and Class III atmospheres, Directive 94/9/EC,還具備(ATEX) Compliant for CE ATEX II 2G Exd IIB+H T6, CSA & FM approved for Class I, Div. 1, Groups B, C, D; Class II, Div. 1, Groups E, F, G and Class III atmospheres IECEx Ex d IIB+H T6。它尺寸小,重量相當于常規防爆開關的一半。打開鋁制外殼的蓋板,很容易進行和單刀雙擲繼電器,電源進行接線。 需要24 VDC, 120 或240 VAC電源,電路連接。開蓋時,螺釘始終留在蓋上,不會現場丟失。無需打開外殼就可以調整設定點。美國Dwyer(德威爾):
Dwyer壓力表差壓表,Dwyer流量傳感器,Dwyer變送器;Dwyer風速計,Dwyer溫度傳感器,Dwyer本安隔離柵;Dwyer安全開關;Dwyer液位開關,Dwyer壓差開關,Dwyer安全閥,Dwyer自動蝶閥,Dwyer閥門定位器,Dwyer流量計
南京云聯電氣有限公司供應100%原裝進口dwyer,庫存量大,貨源充足,折扣價熱賣!
銷售熱線 郵箱@163.com 咨詢QQ:
產品型號:
美國Dwyer德威爾
Dwyer壓力表差壓表
Dwyer流量計 流量開關
Dwyer液位計 液位開關 閥門執行機構
Dwyer差壓表2000系列Dwyer液位變送器PLT系列
Dwyer差壓表 高精度2 5000系列
Dwyer微差壓變送器603A系列
Dwyer高精度 防爆 壓力變送器639系列
Dwyer微差壓變送器646系列
Dwyer微差壓變送器668系列
Dwyer液位變送器PLT系列
Dwyer大隔膜
Dwyer壓力開關1630系列
Dwyer小型超微差壓開關1900系列
Dwyer防爆 超微 差壓開關1950系列
Dwyer重復性好 精密 差壓開關3000MR 3000MRS系列
Dwyer測量壓力、真空或差壓 差壓表4000系列
Dwyer316L不銹鋼 衛潔型 壓力變送器637S系列
Dwyer單路 雙路 差壓開關1620系列
Dwyer觸點控制 微差壓開關1640型
Dwyer防爆 全天候 與天然氣兼容 超微 差壓開關1950G系列
Dwyer帶指示 微差壓變送器604D系列
Dwyer微差壓變送器604A系列
Dwyer帶指示 微差壓變送器605系列
Dwyer微差壓變送器 監測壓力和風速MS
Dwyer經濟型 數字壓力表DPGA系列
Dwyer不銹鋼壓力表SGB系列
Dwyer數字校驗壓力表DCG系列
Dwyer不銹鋼壓力表 工業SGD系列
Dwyer 2 5不銹鋼壓力表SGF系列
Dwyer壓力表 開關 變送DPG-200
Dwyer電磁流量計RK-EF系列
Dwyer電磁流量計M系列
Dwyer流量計附件F195
Dwyer帶流量限位開關的流量計FS系列
Dwyer截止閥型 流量開關GVS系列
Dwyer流量開關VASP系列
Dwyer不銹鋼流量計SS系列
Dwyer液位開關S-D
Dwyer射頻 電容式液料位開關RFC
Dwyer液位開關F7 HPS
Dwyer液位開關L6系列
PBLT2和PBLTX系列,
SBLT2和SBLTX系列,
ULT系列超聲波液位變送器
391/393/394系列外室式液位控制器
L4系列FLOTECT浮子液位開關
L6系列FLOTECT浮子液位開關
102/1102系列法蘭式外室式液位控制器
201/203/204系列側面安裝外室式液位控制器
190系列頂部安裝式液位控制器
南京云聯電氣有限公司是中國地區供應商
公司名稱:南京云聯電氣有限公司聯系人:葉先生(銷售經理) 電話:86(25)52791167 傳真:86(25)52791169網址:http://www.ylue.cn 郵箱:@163.com QQ: 地址:南京市江寧區雙龍大道1222號同曦國際廣場1號樓8層 郵編:211100
工作原理:
音叉由晶體激勵產生振動,當音叉被液體浸沒時振動頻率發生變化,這個頻率變化由電子線路檢測出來并輸出一個開關量。 音叉式液位開關又被稱作“電氣浮子“凡使用浮球液位開關和由于結構、湍流、攪動、氣泡、振動 等原因導致不能使用浮球液位開關的場合均可使用“電氣浮子”。由于音叉液位開關無活動部件,因此無須維 護和調整,是浮球液位開關的升級換代產品
應用范圍:
音叉限位開關可以任何方向安裝于液體罐、液體槽上用于液位的上下限位報警或控制, 亦可安裝于管道上防止泵的無料運行。適合下列介質的液位測量
² 自來水、曠泉水
² 紙漿、膠水、染料
² 廢水、泥漿
² 酸、堿溶液可產生氣體的液體
² 柴油等危險場所
產品特點:
² 音叉限位開關的檢測不受被測介質電參數及密度的影響
² 結垢、攪動、湍流、氣泡、振動、中等粘度、高溫、高壓等惡劣條件對檢測無影響
主要技術指標:
² 工作電源:AC220V±10% 或 DC24V
² 功耗:<3W
² 儀表工作環境溫度:-20~45℃
² 叉體工作溫度:-40℃~120℃
² 本安防爆:iaⅡBT4
² 輸出方式:繼電器接點輸出或集電極開路輸出
典型安裝:
音叉限位開關通常采用側裝(在倉壁側面安裝)方式安裝與倉體側壁對料位高度進行上下限位置的檢測;當倉體不便側面開孔時可采用頂裝(在倉的頂部安裝)方式安裝,位置應選擇能避開進料時物料沖擊的位置;亦可安裝與管道上防止泵的無料運行



MEYLE售后服務/德國梅爾售后MEYLE技術支持/德國梅爾技術支持MEYLE編碼器選型/德國梅爾編碼器選型MEYLE編碼器售后服務/德國梅爾編碼器售后MEYLE編碼器技術支持/德國梅爾編碼器技術支持德國MEYLE梅爾編碼器FINS5810C593R/1024 FINS5810A593R-1024 FINH5810A593R/1024 FINH5810A593R-1024 FINH5814A596R/1024 FINS5810C593R/1024 FINS5810A596R/1024 FINH5810A293R/1024 FINS5806A593R/1024 FINS5810A593R/1024 FINH5810A596R/1024 FINH5814A593R/1024 FINH5812A593R/1024 FINH5812A596R/1024AINH9020593R/1024 AINH9012593R/1024 AINH9025593R/1024AINH9020293R/1024 AINH9012293R/1024 AINH9022593R/1024AINS4006593R/1024 AINS4006593A/1024 AINS4006293R/1024AINS4006293A/1024 FINH58 MY473CH標準工業型工作溫度:-30...+100℃防護等級:IP67 可倍頻輸出達96000ppr。德國MEYLE梅爾編碼器AINS90-593R-2048,CAMS581212EK42SBB CASS580013EK42DPZ CAMS581213EK42DPZ CAMS581212EK42DPZCAMS581212EK42PGB CAMS581213EK42PGB CAMS581213EK42SBB CAMS581212EK42PGBMY147 FINH58 MY473CH SNK513-075-107CHFIN58MY0290N FINH58MY473CS CASS580012Ek42DPZ AINH9016593R-20(AINH90MY528CH) cams58-my165ch-521-105-509ch CAMS58 MY165CH GHT512 293R/2048 FINS58 MY189CH梅爾MEYLE增量型實心軸光電編碼器 AINS40 梅爾MEYLE增量型實心軸光電編碼器AINS90梅爾MEYLE增量型實心軸光電編碼器FINS90梅爾MEYLE增量型實心軸光電編碼器AINS 41梅爾MEYLE增量型實心軸光電編碼器AINS 58 梅爾MEYLE增量型實心軸光電編碼器BINS24梅爾MEYLE增量型實心軸光電編碼器BINS37梅爾MEYLE增量型空心軸光電編碼器FINH58梅爾MEYLE增量型空心軸光電編碼器AINH90梅爾MEYLE增量型空心軸光電編碼器DINH100梅爾MEYLE增量型空心軸光電編碼器AINH40Z梅爾MEYLE增量型空心軸光電編碼器AINH 58 梅爾MEYLE增量型實心軸光電編碼器FINS 90梅爾MEYLE增量型空心軸光電編碼器AINH 95梅爾MEYLE增量型空心軸光電編碼器DINH145梅爾MEYLE增量型空心軸光電編碼器BINH37梅爾MEYLE絕對型單圈/多圈光電梅爾MEYLE絕對型光電編碼器CAXX37,梅爾MEYLE絕對型光電編碼器BAXX58,梅爾MEYLE絕對型光電編碼器CAXX58 ,梅爾MEYLE絕對型光電編碼器FAXX90附 件 超速開關 梅爾MEYLE增量型光電編碼器+超速 開關INB5
德國MEYLE梅爾編碼器FINS5810C593R-1024標準工業型工作溫度:-30...+100℃防護等級:IP67 可倍頻輸出達96000ppr。德國MEYLE梅爾編碼器AINS90-593R-2048梅爾MEYLE增量型實心軸光電編碼器AINS40 梅爾MEYLE增量型實心軸光電編碼器AINS90梅爾MEYLE增量型實心軸光電編碼器FINS90梅爾MEYLE增量型實心軸光電編碼器AINS 41梅爾MEYLE增量型實心軸光電編碼器AINS 58 梅爾MEYLE增量型實心軸光電編碼器BINS24梅爾MEYLE增量型實心軸光電編碼器BINS37梅爾MEYLE增量型空心軸光電編碼器FINH58梅爾MEYLE增量型空心軸光電編碼器AINH90梅爾MEYLE增量型空心軸光電編碼器DINH100梅爾MEYLE增量型空心軸光電編碼器AINH40Z梅爾MEYLE增量型空心軸光電編碼器AINH 58 梅爾MEYLE增量型實心軸光電編碼器FINS 90梅爾MEYLE增量型空心軸光電編碼器AINH 95梅爾MEYLE增量型空心軸光電編碼器DINH145梅爾MEYLE增量型空心軸光電編碼器BINH37